First Test: MapRunG - MapRun on a Garmin Watch

Posted by MichaelRaz on
URL: http://maprun.308.s1.nabble.com/MapRunG-MapRun-on-a-Garmin-Watch-tp188p227.html

Fenix 5X, iPhone XS Max (everything latest software)

Install:  
Overall a very good integration with the Garmin environment with no system level issues.

Watch specific:  During the initial setup when the Watch ID is displayed, the watch screen contains general instructions on entering the ID into MapRunF.  This results in the ID being on the bottom of the screen in a very tiny font that was close to unreadable (especially for us old guys).  It was difficult to tell an 8 from a 3 due to some pixilation (I should have taken a screen shot - sorry).  Although there are other means to capture the ID (through Garmin Connect on the phone) this is the first presentation of the ID and the one that most people will use I suspect.  Perhaps the layout of the screen could be modified to reduce the text and present the ID in the center (maybe two lines?) in a larger font.  I realize that this may be very watch dependent.

Setting up Event:  Very smooth and a very nice integration between the two environments.

Running the Event:  Again, no general issues at all.  Occasional slow reaction to a punch but this is likely more to do with the GPS catching up and the limited processing on the watch.  I'll likely try playing around to set up a F235 as well and try both watches concurrently (using that other application).  Naturally it is very difficult to provide a valid GPS comparison.

Uploading Results:  Again, no issues at all - very smooth and easy, especially given the limitations involved in linking with Garmin.

Issue/Comment?  During the run the watch shows the last Control Code and displays the number of controls punched out of the total.  I realize this is "as designed" but there is an issue from my perspective on this.  I punched an extra control in the middle of the course (just ran past it - no issue) so, from that point forward the display (example) 7/13 is no longer really valid and can cause confusion as the next control to be punched is actually 7.  It might be possible to end up with something like 15/13, which provides no real value and is misleading.  I'm not sure how to solve this and understand the difficulty in ignoring extra punches dynamically during a point to point.  

Now for the feature request (I know it is really early to be asking for a feature):  I'll go one step more and suggest that maybe control count, and the page that shows all the controls punched, is not needed, or should be set by the administrator of the event to show or not (applies to MaprunG and F actually).  I'm looking at this from the perspective of a regular competitive event with Si ( or other).  The runner does not have a system that tracks which controls they have punched and, other than validating the Control Code at the flag, has no means of seeing the status of how many controls have been punched.  Given that MapRunG needs to have a paper map (and I acknowledge that this is the focus in our club, while not for everyone), perhaps, at the most, the watch should show the last Control Code that was punched - just like coming across a control in the woods and checking the code, hoping it is on your map and you can now figure out where you are (or is that just me??).  Perhaps a solution is to provide two modes - non competitive and competitive, with the latter not displaying as much details - more like a standard SI event.  Understood that this would need to be synced with the MapRunF system to keep things consistent during an event regardless of which system was being used.

Overall, really successful first outing with this and really appreciate the hard work that has obviously gone into it.  Thanks so much Peter (and team).

Michael Raz
Ottawa Orienteering Club